NAVI BARS

Settings folder ☛ Access

To open this menu, you will be asked to enter your access code.

The access code is set to 1234 at the factory.

The following settings can be altered from this menu.

Access Control

Select “Yes” or “No” to turn the access control in all menus on or off. NOTE: Even when “No” is selected, the access code still has to be entered before you can watch locked channels.

Receiver lock

If you select “Yes”, you will have to enter the access code every time you start the Mediamaster from standby.

Age rating control

If you want everybody to have access to all available types of programmes, select “No”.

If you select “Yes”, you may block programmes unsuitable for children.

Age Limit

Select an age limit between 3 and 18 on the line that appears.

However, you should be aware that not all Service Providers have the necessary codes for these functions implemented in their transmissions.

Change access code

This is used to change the access code from the default, factory-set 1234. This code is used to access any Mediamaster function that requires it, e.g. access code. If you forget the access code that you have set, contact and Nokia Authorised Service Centre for assistance.

Settings folder ☛ Time

To open this menu, you will be asked to enter your access code.

The access code is set to 1234 at the factory.

Select cursor up/down to adjust the time in half-hour increments; to adjust the minutes, select cursor left/right .

GB 25