Manuals / Brands / TV and Video / Universal Remote / Nokia / TV and Video / Universal Remote

Nokia 150T all, all, The access code has been set to 1234 at the factory, The access code has been set to 1234 at the factory

1 33

Download 33 pages, 1.55 Mb

NAVI BARS

Settings folder ☛ SW update

To open this menu, you must enter the access code.

The access code has been set to 1234 at the factory.

In order to keep the Mediamaster up-to-date, it will be possible to download new versions of the system software (SW). New software may include new and improved features for existing menus.

Enter this menu to check for new software. If new software is available, information will be shown in the menu on how to proceed.

You may have to select a specific channel in order to download new software, which your service provider will give you.

NOTE: If you select a new software version to download, all of your previous set- tings, your access code, your favourite channels, etc. will be erased. Updating may take a while.

NOTE: Do not turn off the Mediamaster, use the remote control or disconnect the antenna cable while downloading as this will damage the software and the receiver will need to be sent to a Nokia Authorised Service Centre.

Settings folder ☛ Reinstall

To open this menu, you must enter the access code.

The access code has been set to 1234 at the factory.

NOTE: Use this option only if you must restart the installation procedure from the beginning as all of your previous settings, your access code, your favourite chan- nels, etc. will be erased.

Press “Go back” to leave this menu when the warning is displayed, if you do not want to reinstall anything.

GB 26

Contents

Page Page Connecting a TV and a video recorder Control cursor up/down cursor left/right Quick Guide End user license Security information Remote control Front and rear panel IMPORTANT: READ CAREFULLY BEFORE OR USING THE SOFTWARE NOKIA CORPORATION, NOKIA HOME COMMUNICATIONS END-USERSOFTW ARE AGREEMENT Page IMPORTANT! Read this before using Mediamaster The cursor button digital audio TV SCART antenna TV/VCR mains lead About the SCART sockets 2. Indoor and window-mountedaerials your dealer on the satellite re- ceiver screened Tuning your TV to the Mediamaster Select RF modulator output channel select confirms cursor left right cursor up Page Navi Bars folders Settings bookmarks Control system folders menus Settings Banner Time-out Volume bar Impor tant about editing channels Create list folder How to give a specific name cur- sor right •Enter the name as follows : cursor right Delete list Rename list Rearrange lists Add/Delete channels Rearrange channels cur sor left Lock channels General Note: The timer function only works when the receiver is in standby Timer setup The access code is set to 1234 at the factory Automatic search Manual search Channel Network search: TV screen format Position of the RGB output Set transparency level Select digital audio format the digital output Access Control Receiver lock Age rating control Age Limit Change access code The access code has been set to 1234 at the factory all Back info cursor left right temporary Audio language txt/back AC-3 Access Access code Access control AGC Problem Possible causes What to do if the problem cannot be solved Transmission Standar ds DVB, MPEG 2, OFDM RF input Modulator output DIGITAL AUDIO (S/PDIF) AUDIO R L SERIAL (RS 232) Serial data