Nokia 2116i manual Picture messages, Set up voice mail with dialing codes

M e s s a g e s

Set up voice mail with dialing codes

1.In the standby mode, select Contacts > 1-touch dialing.

2.Scroll to an empty 1-touch dialing slot, and select Assign.

3.Enter your voice mailbox number, including the area code.

4.Refer to dialing codes, and enter codes as necessary using the information that you saved from "Voice mailbox number and process," page 38.

For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number (for example, 2145551212pp).

5.Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.

6.Enter a name (such as voice mail), and select OK.

To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key in the standby mode.

■Picture messages

Picture messaging is a network service. If your wireless service provider supports this feature, your device comes with five preloaded pictures. You can, however, over-write any of the five pictures that come with your device. Pictures can be attached to a message and sent using text messaging to compatible devices or PCs. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the templates folder at Menu > Messages > Text messages > Templates.

Note: Picture message function can be used only if it is supported by your network operator or service provider. Only compatible devices that offer picture message features can receive and display picture messages.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Write and send

When a picture is added to a text message, the message converts to picture message. The message counter in the upper right of your display shows the characters available for you to type in.

1.In the standby mode, selectMenu > Messages > Text messages > Create message > Text > Edit message.

2.Write a message using the keypad (or enter nothing if you choose to just send a picture), and select Options > Insert picture.

39