Nokia 2116i manual Voice commands, Add a voice command, Activate a voice command

S e t t i n g s

In the standby mode, select Menu > Settings > Time and date settings > Auto- update of date & time > On, Confirm first, or Off.

If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you re-enter your digital network.

If your battery is removed or discharged outside the digital network, you may be prompted to enter the time manually (once the battery is replaced or recharged and you are still outside of the digital network).

■Voice commands

Voice commands allow you to quickly perform certain commands by speaking them, instead of using the keypad to access them. For example, you can switch your profile, call voicemail, playback a voice memo, or review recent calls by speaking the recorded command.

Add a voice command

Before using a voice command, you must add the command to the device function.

1.In the standby mode, select Menu > Settings > Voice commands.

2.Select the device function you wish to tag: Profiles, Voice mailbox, Voice recorder, or Call log.

3.If necessary, select an option associated with that function, and select Options > Add command.

4.Select Start, and speak the voice command clearly into the microphone. Do not select Quit unless you want to cancel the recording.

The device replays then saves the recorded command. appears next to functions that have voice commands assigned.

Activate a voice command

After you have associated a voice command with a device function, you can request the function by speaking the voice command.

1.In the standby mode, select and hold Contacts.

2.When Speak now appears, say the voice command clearly into the microphone.

When the device finds the voice command, Found: appears, and the device plays the recognized voice command through the earpiece. The function you requested is activated.

53