Nokia 2116i manual Tone settings, Call settings, Set a timed profile, Location info sharing

S e t t i n g s

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, you attend an event that requires your device be set to Silent before the event starts, but you forget to return it to Normal until long after the event. A timed profile can prevent missed calls by returning your device to the default profile at a time you specify.

Timed profiles can be set up to 24 hours in advance.

1.In the standby mode, select Menu >Settings > Profiles.

2.Select the profile you wish to activate.

3.Select Timed.

4.Enter the time for the profile to expire, and select OK.

■Tone settings

From this menu, you can adjust the ringing volume, keypad tones, and other tone settings for the currently active profile. You can also set the device to ring for calls from phone numbers that belong to a selected caller group. See "Personalize a profile," page 45.

■Call settings

Location info sharing

Location info sharing is a network service. See "Network Services," page 7.

If your wireless service provider supports this feature, location info sharing allows the phone to share position information over the network. For calls to emergency numbers, this position information may be used by the emergency operator to determine the position of the phone. The functionality and accuracy of this feature is dependent on the network, satellite systems, and the agency receiving the information. It may not function in all areas or at all times.

In the standby mode, select Menu > Settings > Call settings > Location info sharing > Emergency or On > OK > OK.

Emergency—This is the default profile. The phone location information is shared only during an emergency call to the official emergency number programmed

into your phone. The phone screen displays in the upper, left-hand corner of the standby screen.

On—The phone location information is shared with the network whenever the

phone is powered on and activated. The screen displays in the upper left-hand corner of the standby screen.

46