Remote control
This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be performed by using the buttons on the front panel.
Press once to turn the sound off/on (mute).
Press and hold for a few seconds to switch the Mediamaster in and out of standby mode.
0 - 9 Change channel and to select individual menu options. Note: If 0 is entered as the first digit, the TV Release func- tionality is activated (see below).
0To toggle between the 230 T and any equipment connected to the AUX Scart; e. g. a Video recorder or a satellite receiver.
info | In viewing mode: To display short and extended information |
| (if transmitted) about current and next programmes. |
| In Navi Bars with a bookmark in focus: Will show informa- |
| tion about the bookmark. |
back | Go back one level at a time within menus without storing any |
| settings. |
| To toggle between present and previous TV/Radio channel |
| in viewing mode. |
| Close the Navi Bars. |
select | Confirm the selection of a highlighted item. |
| Open the Navi Bars. |
opt | Select options in viewing mode. |
txt | Press to enter teletext (if available). |
The cursor button
Cursor up
Move up in the menus and change to the next channel in viewing mode.
Cursor left
Move left/change set- tings in menus. Decrease the volume level in viewing mode.
Cursor right
Move right/change settings in menus.
Increase the volume level in viewing mode.
Cursor down
Move down in the menus and change to the previous channel in viewing mode.
GB 9
