Nokia 3125 manual Insert dialling codes, Setup voice mail with dialling codes

M e s s a g e s ( M e n u 1 )

Be precise; you will need this information in Setup voice mail with dialling codes, 26.

Insert dialling codes

Press the * key repeatedly to cycle through dialling codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialling string.

The following dialling codes are available:

*—Bypasses a set of instructions.

+—International dialling access.

p—Pauses for 2.5 seconds before sending any numbers that follow.

w—Waits for you to press the Talk key before sending the numbers or codes that follow.

Setup voice mail with dialling codes

1.At the standby mode, select Contacts > Speed dials.

2.Scroll to an empty speed dialling slot and press Assign.

3.Enter your voice mailbox number, including the area code.

4.Refer to dialling codes and enter any codes as necessary using the information that you wrote down from Write down voice mailbox number and process, 25.

For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number, for example, 2145551212pp.

5.Enter any remaining pauses or other information that allows you to listen to your messages, and press OK.

6.Enter a name (such as Voice Mail), and press OK.

To dial and listen to your voice mail, press and hold the assigned speed dialling key at the standby mode.

Note: If Speed dialling is off, the phone displays a prompt asking if you would like to turn on speed dialling.

26 Copyright © 2004 Nokia. All rights reserved.