Nokia 3125 manual Voice recorder, Activate a voice command, Record speech or sound

Note: Do not press Quit unless you want to cancel the recording.

The phone replays and then saves

the recorded tag. The icon appears next to commands which have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a phone function, you can issue a command by speaking the voice tag.

1.Press and hold Contacts (or Go to).

2.When Speak now appears, pronounce the voice tag clearly into the microphone.

When the phone finds the voice tag, Found: appears, and the phone plays the recognised voice tag through the earpiece. The function you requested is activated.

V o i c e ( M e n u 6 )

■Voice recorder

This feature allows you to record pieces of speech or sound with your phone and listen to them later. You can also use recorded speech or sound as ring tone. The total available time is approximately 3 minutes if no memos have been stored. The maximum length of a recording depends on how much memory remains available.

The recorder cannot be used when a data call connection is active.

Record speech or sound

1.At the standby mode, select Menu > Voice > Voice recorder > Record.

2.After the recorder start tone is heard, begin recording speech or sound.

3.When you are finished recording, press Stop.

Options

After you have associated a voice tag to a command, you can choose one of the following options:

•Select Playback to listen to the voice command tag.

•Select Change to change the voice command.

•Select Delete to erase the voice command tag.

Options

After you have saved the recording, select Menu > Voice > Voice recorder > Recordings list, highlight the recording from the Recordings folder in the Gallery menu, and choose one of the following options:

Open—Open and play the selected recording.

Delete—Delete the selected recording from the Recordings list.

Copyright © 2004 Nokia. All rights reserved. 61