S e t u p y o u r p h o n e
2.Remove the battery by lifting it from the finger grip (3).
3.To release the UIM card holder, slide the card holder backwards
(4) and open it by lifting (5).
Insert the UIM card into the UIM card holder (6) so that the card’s bevelled corner points to the camera lens. Make sure that the card’s golden contact area is facing downwards and that the card is properly in place.
4.Close the UIM card holder (7) and slide it forwards to lock it (8).
5.Replace the battery (9).
6. To replace the back cover:
Place the top of the back cover over the top of the phone (10). Press the bottom of the back cover towards the phone until the cover is locked into place (11).
■Changing the covers
Before changing the cover, always switch off the power and disconnect the phone from the charger or any other device. Avoid touching electronic components while changing the covers. Always store and use the phone with the covers attached.
The phone is supplied with some
Note: Use only normal, plain paper used in standard printers (whose weight is
16 | Copyright © 2004 Nokia. All rights reserved. |