V o i c e ( M e n u 1 0 )
5.Press Start, and speak the voice tag clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone replays and then saves the recorded tag. The 
icon appears next to commands which have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a command by speaking the voice tag.
1.Press and hold Contacts (or Go to).
2.When Speak now appears, pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag, Found: appears, and the phone plays the recognized voice tag through the ear piece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can choose one of the following options:
•Select Playback to listen to the voice command tag.
•Select Change to change the voice command.
•Select Delete to erase the voice command tag.
■Voice recorder
This feature allows you to record pieces of speech or sound with your phone and listen to them later. The total available time is 180 seconds if no memos have been stored. The maximum length of a recording depends on how much memory remains available.
Record speech or sound
1.At the standby screen, select Menu > Voice > Voice recorder > Record and press Select.
2.After the recorder start tone is heard, begin recording speech or sound.
3.When you are finished recording, press Stop.
4.Enter the title you wish to assign to the recording and press OK.
Options
After you have saved the recording to the Recordings list, highlight the recording and choose one of the following options:
72 | Copyright © 2004 Nokia. All rights reserved. |
