DTMF tones are sent during an active call. You can send them manually from your phone’s keypad, or send them automatically by saving them in your phone.

Set type

1.At the standby screen, select Menu > Settings > Phone settings > DTMF tones > Manual DTMF tones and press Select.

2.Select one of the following options and press Select:

Continuous — the tone sounds for as long as you press and hold a key.

Fixed — Used to send tones of the duration you specify in the DTMF tone length option.

Off — Used to turn off tones. No tones are sent when you press a key.

Set fixed length

You can also specify DTMF tone length when using the Fixed option.

At the standby screen, select Menu

>Settings > Phone settings > DTMF tones > DTMF tone length > Short (0.1 seconds) or Long (0.5 seconds) and press Select.

Create a welcome note

You can write a welcome note which briefly appears on the display screen whenever you switch your phone on.

S e t t i n g s ( M e n u 4 )

Note: Predictive text input is not available for entering Welcome note text.

1.At the standby screen, select Menu > Settings > Phone settings > Welcome note and press Select.

2.Enter a note (up to 44 characters).

Press the * key to display and select from available special characters.

3.When you are finished, press Options > Save, and press Select.

Scroll to Delete and press Select if you want to delete the previous text and begin creating another welcome note.

Confirm UIM service actions

If you select this option, the phone will show confirmation messages when you use UIM card services. Please check with your service provider for more details.

Choose a banner

Banner is a network service. See ”Network services” on page 9 for more information.

If your wireless service provider supports this feature, then you can choose whether the display shows the operator logo when the phone is in the idle state.

Copyright © 2004 Nokia. All rights reserved.

53

Page 53
Image 53
Nokia 3205 manual Create a welcome note, Confirm UIM service actions, Choose a banner, Set type, Set fixed length