Nokia 3205 manual Creating cut-out covers, Using the cutter to create cut-out covers

S e t u p y o u r p h o n e

■Using the cutter to create cut-out covers

With the cutter you can create your own front and back ’cut-out covers’ for your Nokia 3205 phone. For example, you can create a cut-out cover from a picture that you have taken using the camera in your Nokia 3205 phone and printed using a standard printer.

There is a separate cutter for the front (1) and back (2) cut-out covers.

The cutter has two parts, the perforator (3) and the base (4). The pictures show these parts for the cutter of the front cut-out cover.

Note: Use only normal, plain paper used in standard printers (weight 60-135 g/m2) that is no thicker than

0.1mm. Colours or ink used in the paper must not contain metal particles.

Creating cut-out covers

If you want to cut out a picture printed on a large sheet, first remove surplus paper with, for example, a scissors.

To make a front or back cut-out cover:

1.Remove the rubber strap that is around the cutter.

2.Make sure that the perforator and the base are hooked together from the top (1).

3.Place the cutter on a flat, stable surface, for example a table.

4.Place a paper sheet in the correct position inside the cutter. Position the perforator over the base so that the catch at the bottom of the base (see the blue area in picture 1) is aligned with the corresponding slot in the perforator.

18 Copyright © 2004 Nokia. All rights reserved.