2With your phone on or off, connect the lead from the charger to the charging port located on the bottom of the phone. The battery indicator bar appears on the screen and starts to scroll up and down after a few seconds. With the phone off, only the battery indicator bar will appear.

3Disconnect the charger from the phone and AC outlet when the battery is fully charged.

After the indicator bar stops scrolling, the battery is almost fully charged, and is fully charged after an additional hour (approximately). The message Battery Full is displayed.

Note: For best performance, charge the battery for 24 hours before you use the phone. The charging time depends on the charger and battery you use. For example, the charging time for the BLC-2 battery with the ACP-7U charger is approximately 4 hours.

Important: Do not leave the battery connected to a charger for more than 72 hours, since prolonged maintenance charging could shorten its lifetime.

Remove the battery

Warning: Use only your hands to remove the battery. Do not puncture, burn or use any objects that may damage the phone or the battery. Please recycle the battery, or dispose of properly.

You will need to remove the existing battery if you want to install a new battery or if you have purchased a spare battery. Make sure the phone has been turned off for ten seconds.

1Remove the back cover of the phone as shown in step 1 on page 12.

2 Place your index finger in the space at the bottom of the battery, and press toward the top of the phone.

3 Take out the battery.

[ 14 ]

Page 22
Image 22
Nokia 3586I manual Remove the battery, Take out the battery