Nokia 3586I manual End calls, Disconnect second party, Disconnect first party

Advanced features

Note: Check with your service provider to make sure this service is available in your network.

1Make a call to the first participant as usual. When you are ready to place a call to the next party:

2Press Options, then press New call.

3Enter the number and press the Send key (or press Search to recall the number from the phone book).

4Press the Send key again to connect both parties.

5To end the call, press the End key. This action disconnects both parties.

End calls

To end a conference call (disconnect with all callers), press the End key. Or you can also press Options, then select End all calls.

Disconnect second party

While all three parties are connected, pressing the Send key disconnects the second caller, keeping the first party’s call active.

Disconnect first party

If you wish to disconnect with the first party and remain connected to the second party, have the first party terminate the call on his/her end.

• SEND OWN CALLER ID WHEN CALLING

This feature allows you to block caller ID when you call someone (your number will not be displayed on their caller ID). This feature may only be effective when calling a number equipped with caller ID.

Note: This feature is available only when supported by the wireless network and may not function if you are roaming.

Important: This feature works on a call-by-call basis. You must enable this feature each time you want to block the sending of your own number to the recipient’s caller ID.

[ 85 ]