Nokia 3589i manual USE Call Waiting, Make a Conference Call, Send OWN Caller ID When Calling

Advanced features

• USE CALL WAITING

This network service lets you receive an incoming call when you’re already in a call. When you receive an incoming call, your phone displays the caller’s phone number (or the caller’s entry in your phone book). The phone also beeps, notifying you of the incoming call.

To Answer a waiting call, Press the Send key (or press Answer) to place the current active call on hold automatically and answer the new call.

To Switch between the two calls, accepting the waiting call puts the first caller on hold. To put the second caller on hold and reconnect with the first caller, press the Send key.

To end the active call, simply allow the other party to hang up; the call on hold then becomes the active call. OR:

1Press the End key to terminate the active call.

2The network redials with the call on hold. Answer the call as any normal incoming call.

•MAKE A CONFERENCE CALL

You can talk to two people at the same time. Conference calling is a network-dependent feature.

Note: Check with your service provider to make sure this service is available in your network.

1Make a call to the first participant. When you’re ready to place a call to the next party,

2Press Options, and press New call.

3Enter the number and press the Send key (or press Search to recall number from Contacts).

4Press the Send key again to connect both parties.

5To end the call, press the End key. This action disconnects both parties.

End calls

To end a conference call, press the End key. Or you can also press Options, and select End all calls.

Disconnect second party

While all three parties are connected, press the Send key to disconnect the second caller and keep the first call active.

Disconnect first party

To disconnect the first party and remain connected to the second party, have the first party terminate the call.

• SEND OWN CALLER ID WHEN CALLING

You can block caller ID when you call someone (your number will not be displayed on their caller ID). This feature may only be effective when calling a number equipped with caller ID.

Note: This feature is available only when supported by the wireless network and may not function if you are roaming.

Important: This feature works on a call-by-call basis. You must enable this feature each time you want to block the sending of your own number to the recipient’s caller ID.

[ 49 ]