[ 23 ]
Your phone
3
Transfer is used to connect an incoming call or a call on hold with an active
call and to disconnect yourself from both calls.
Send touch tones is used to send touch tone strings, for example, passwords
or bank account numbers.
1Key in the digits with - . Each keystroke generates a touch
tone, which is transmitted while the call is active. Press repeatedly
to produce: *, p (inserts a pause of about two seconds before, or
between touch tone characters.), and w (if you use this character, the
remaining sequence is not sent until you press Send again during the
call). Press to produce #.
2To send the tone, press OK.
Tip: You can also store a sequence of touch tones for a contact card. When
you make a call to the contact, you can retrieve the sequence. Add
touch tones to the phone number or Touch tone fields in a contact card.
Glossary: Touch tones are the tones you hear when you press the
number keys on the phone keypad. Touch tones allow you to
communicate with voice mailboxes and computerized telephony
systems.
Settings for call forwarding
When this system service is activated, you can direct your incoming calls to
another number, for example, to your voice mailbox number. For details,
contact your service provider.
Go to Menu→ Tools→ Call forwarding
Select one of the forward options, for example, select If busy to forward
voice calls when your number is busy or when you decline incoming calls.
• Select Options→ Activate to turn the forward setting on, Cancel to
turn the forward setting off, or Check status to check whether the
forward is activated or not.
• To cancel all active forwards, select Options→ Cancel all forwards.
For information about the forward indicators, see “Indicators related to
actions” on page 11.