[ 27 ]
Your phone
3
SET A CALL COST LIMIT FOR YOURSELF
1Select Options→ Settings→ Call cost limit→ On.
2The phone requests you to enter the limit in units. For this you may
need the PIN2 code. Depending on the Show costs in setting, enter
either the amount of charging units or currency.
When the charging limit you have set yourself is reached, the counter stops
at its maximum value and the note Reset all calls' cost counter is displayed.
To be able to make calls, go to Options→ Settings→ Call cost limit→ Off.
For this you need the PIN2 code. See “Security” on page 40.
Erase call cost counters - Select Options→ Clear counters. For this you
need the PIN2 code. To clear an individual entry, scroll to it and press .
GPRS data counter
Go to Log→ GPRS counter.
Allows you to check the amount of data sent and received during packet
data (GPRS) connections. For example, you may be charged for your GPRS
connections by the amount of data sent and received.
View the general log
Go to Menu→ Log and press then .
In the general log, for each communication event, you can see the sender or
recipient name, phone number, name of the service provider, or access point.
Note: Sub-events, such as a text message sent in more than one part and
packet data connections, are logged as one communication event.
Filter the log
1Select Options→ Filter. A list of filters opens.
2Scroll to a filter and press Select.
Erase the contents of the log
To erase all the log contents, Recent calls log, and
Messaging delivery reports permanently, select
Options→ Clear log. Confirm by pressing OK.