Nokia 3600 Gprs, Use login script The options are Yes / No, Login script Insert the login script

Settings

Note: Charges may apply for certain types of received calls, such as roaming and high speed data calls. Contact your GSM service provider for more information.

Note: The phone expects the callback call to use the same data call settings that were used in the callback-requesting call. The system must support this type of call in both directions, to and from the phone.

•Callback type - The options are Use server no. / Use other no. Ask your service provider for the correct setting; it will depend on the service provider’s configuration.

•Callback number - Key in your phone’s data phone number which the dial back server uses. Usually, this number is the data call phone number of your phone.

•Use PPP compression - When set to Yes, this option speeds up the data transfer, if supported by the remote PPP server. If you have problems with establishing a connection, try setting this to No. Contact your service provider for guidance.

Glossary: PPP (Point-to-Point Protocol) - a common networking software protocol that enables any computer with a modem and a phone line to connect directly to the Internet.

•Use login script - The options are Yes / No.

•Login script - Insert the login script.

•Modem initialization (Modem initialization string)- Controls your phone using modem AT commands. If required, enter characters specified by your GSM system service provider or Internet service provider.

GPRS

Go to Menu→ Tools→ Settings→ Connection → GPRS.

The GPRS settings affect all access points using a packet data connection.

[ 39 ]