Nokia 3620 Automatic redial, Summary after call, Anykey answer, Line in use system service

Settings

Call waiting (system service)

The system will notify you of a new incoming call while you have a call in progress. Select Activate to request the system to activate call waiting, Cancel to request the system to deactivate call waiting, or Check status to check if the function is active or not.

Automatic redial

When this setting is activated, your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt.

Press to stop automatic redialing.

Summary after call

Activate this setting if you want the phone to briefly display the duration and cost of the last call. To show costs, the Call cost limit must be activated for your SIM card.

1-touch dialing

Select On, and the numbers assigned to the 1-touch dialing keys (2–9) can be dialed by pressing and holding the key.

Anykey answer

Select On, and you can answer an incoming call by briefly pressing any

key except , , and .

Line in use (system service)

This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line.

Note: You will not be able to make calls if you select Line 2 and have not subscribed to this system service.

To prevent line selection, select Line change→ Disable if supported by your SIM card. To change this setting, you need the PIN2 code.

To switch between the phone lines, press and hold the # key in the standby mode.

[ 35 ]