Nokia 3620 Settings for call forwarding, To send the tone, press OK, Go to Menu→ Tools→ Forward

Your phone

Swap is used to switch between the active call and the call on hold.

Transfer is used to connect an incoming call or a call on hold with an active call and to disconnect yourself from both calls.

Send touch tones is used to send touch tone strings, for example, passwords or bank account numbers.

1Key in the digits with the 0–9keys.

Each keystroke generates a touch tone, which is transmitted while the call is active. Press the * key repeatedly to produce: *, p (inserts a pause of about two seconds before, or between touch tone characters.), and w (if you use this character, the remaining sequence is not sent until you press Send again during the call). Press the # key to produce #.

2To send the tone, press OK.

You can also store a sequence of touch tones for a contact card. When you make a call to the contact, you can retrieve the sequence. Add touch tones to the phone number or Touch tone fields in a contact card.

Note: Touch tones are the tones you hear when you press the number keys on the phone keypad. Touch tones allow you to communicate with voice mailboxes and computerized telephony systems.

Settings for call forwarding

When call forwarding is activated, you can direct your incoming calls to another number, for example, to your voice mailbox number. For details, contact your service provider.

Go to Menu→ Tools→ Forward.

•Select one of the forward options, for example, select If busy to forward voice calls when your number is busy or when you decline incoming calls.

•Select Options→ Activate to set the forward setting on, Cancel to set the forward setting off, or Check status to check whether the forward is activated or not.

•To cancel all active forwards, select Options→ Cancel all forwards.

[ 25 ]