Nokia 3620 warranty Add a ringing tone for a contact card or group, Send contact information

Add a ringing tone for a contact card or group

You can set a ringing tone for each contact card and group. When that contact or group member calls you, the phone plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your phone recognizes it).

1Press to open a contact card or go to the Groups list and select a contact group.

2Select Options→ Ringing tone. A list of ringing tones opens.

3Use the scroll key to select the ringing tone you wish to use for the contact or group and press Select.

To remove the ringing tone, select No personal tone from the list of ringing tones.

Note: For an individual contact, the phone will always use the ringing tone that was assigned last. So, if you first change a group ringing tone and then the ringing tone of a single contact that belongs to that group, the ringing tone of the single contact will be used when the contact calls you the next time.

To listen to a ringing tone, go to Recorder.

Send contact information

You can send contact information through text message, e-mail, Bluetooth connection, or infrared connection.

1In the Contacts directory, scroll to the card you want to send.

2Select Options→ Send then select the method; the choices are: Via text message, Via e-mail(available only if the correct e-mail settings are in place), Via Bluetooth, or Via Infrared.

For further information, see the ‘Messaging’ chapter, “Send and receive data using infrared” on p. 146, and “Send data using Bluetooth connection” on p. 142.

You can add received contact cards to your Contacts directory. See “Receive smart messages” on p. 90 for further information.

[ 56 ]