Nokia 3650 manual Add a ringing tone for a contact card or group, Send contact information

Add a ringing tone for a contact card or group

You can set a ringing tone for each contact card and group. When that contact or group member calls you, the phone plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your phone recognizes it).

1Press to open a contact card or go to the Groups list and select a contact group.

2Select Options→ Ringing tone. A list of ringing tones opens.

3Use the scroll key to select the ringing tone you wish to use for the contact or group and press Select.

To remove the ringing tone, select No personal tone from the list of ringing tones.

Note: For an individual contact, the phone will always use the ringing tone that was assigned last. So, if you first change a group ringing tone and then the ringing tone of a single contact that belongs to that group, the ringing tone of the single contact will be used when the contact calls you the next time.

Tip: To listen to a ringing tone, go to Recorder.

Send contact information

1In the Contacts directory, scroll to the card you want to send.

2Select Options→ Send business card then select the method, the choices are: Via short message, Via e-mail(available only if the correct e-mail settings are in place), via Infrared, or via Bluetooth. The contact card you want to send has now become a ‘business card’. For further information, see the ‘Messaging’ chapter, “Send and receive data via infrared” on page 162, and “Send data via Bluetooth” on page 157.

You can add received business cards to your Contacts directory. See “Receive smart messages” on page 104 for further information.

[ 69 ]