Nokia 6102i manual Packet data Egprs, IR connection indicator

6102i_EN_ESv1_BIL_9248318_UG.book Page 62 Thursday, March 16, 2006 1:38 PM

S e t t i n g s

To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared. When the phone displays Deactivate infrared?, select Yes.

If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be started again.

IR connection indicator

When is shown continuously, the IR connection is activated, and your phone is ready to send or receive data through its IR port.

When blinks, your phone is trying to connect to the other device, or a connection has been lost.

Packet data (EGPRS)

Enhanced general packet radio service (EGPRS), packet data, is a network service which allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks such as the Internet.

The applications that may use packet data are MMS, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up.

To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection.

Select When needed to set the packet data connection to be established when an application needs it. The connection will be closed when the application is terminated.

Select Always online to set the phone to automatically connect to a packet data network when it is switched on.

indicates a packet data connection.

Packet data settings

To connect the phone, use an IR, a Bluetooth technology, or a data cable (CA-42) connection to a compatible PC. Use the phone as a modem to enable packet data connectivity from the PC.

To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, and enter a nick name

62