Nokia 6160i owner manual Choosing a calling card to use, Making calling card calls

For details about your phone’s security code, see “Security code” on page 60.

Dialing	Use for cards that	Cards
		using this
Sequence	require you to:	sequence*
Access no.	Dial 1-800 access number,	MCI, AT&T True
+ phone no.	then phone number, then card	Choice, Sprint
+ card no.	number (+ PIN if required)	Canada, Unitel
Access no.	Dial 1-800 access number,	networkMCI,
+ card no.	then card number (+ PIN if	WorldPhone MCI
+ phone no.	required), then phone number
Prefix	Dial the prefix (any numbers	GTE, PacBell,
+ phone no.	that must precede the phone	AT&T, Stentor
+ card no.	number) and phone number
	you want to dial, then card
	number, (then PIN, if required)

*These calling cards are frequently used with these dialing sequences. However, they may vary and are subject to change at the phone company’s discretion.

Choosing a calling card to use

1.Press Menu 4 1 3 (Settings - Call settings - Calling card)

2.Scroll to desired card and press Options

3.Press W or V to highlight Select and press OK.

4.Enter security code at Security code:, press OK

5.Your phone will display Card ready for use

Making calling card calls

1.Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.

2.Press and hold ófor a few seconds until your phone displays Card call.

29