Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See Call waiting p. 33.
Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network.
■Phone
Select Menu > Settings > Phone and from the following options:
Language settings — to set the display language of your phone, select Phone language. If you select Automatic, the phone selects the language according to the information on the SIM card.
To select the USIM card language, select SIM language.
To set a language for the voice playback, select Voice playback language. See Make a voice dialing call p. 32 and Voice commands in My shortcuts p. 100.
Memory Status — to see how much of the phone’s memory is reserved and how much is free.
Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and set the time.
Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On.
When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Welcome note — to write the note you would like to be shown briefly when the phone is switched on.
Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM. You cannot access this option during an active call.
Copyright © 2007 Nokia. All rights reserved. | 109 |
