Nokia 6275i manual Tones, Time and date, Call

S e t t i n g s

Important: To ensure that all memory card operations are completed

in a controlled way, do not unplug the connectivity cable until Windows notifies you that it is safe to do so. Uncontrolled completion or unexpected disruptions of the memory card operations may cause the memory card and the information stored on it to become corrupted. A corrupted memory card may have to be formatted before it can be used again. When a memory card is formatted, all information on the card is permanently lost.

■Tones

You can change how the phone alerts when there is an incoming call. Select Menu > Settings > Tones and one of the available tone settings. Select and change the available tone options. You can find the same settings in the Profiles menu. See "Profiles," p. 52.

If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.

To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for, scroll to the caller group you want or All calls, and select Mark.

■Time and date

Select Menu > Settings > Time and date and from the following options:

Clock—Set the phone to show the clock in the standby mode, adjust the clock, and select the time zone and the time format.

Date—Set the phone to show the date in the standby mode, set the date, and select the date format and date separator.

Auto-update of time (network service)—Set the phone to automatically update the time and date according to the current time zone.

■Call

Select Menu > Settings > Call and from the following options:

Location info sharing is available for your device. Location info sharing is a network service. See "Network services," p. 5.

If your wireless service provider supports this feature, then location info sharing allows the device to share position information over the network. For calls to emergency numbers, this position information may be used by the emergency operator to determine the position of the device. The functionality and accuracy of this feature are dependent on the network, satellite systems, and the agency receiving the information. This feature may not function in all areas or at all times.

58