Nokia 6590 warranty Choose the Display Language, SET UP the Loopset Profile, SET UP CAR Profile

SET UP THE LOOPSET PROFILE

The LPS-3 Loopset gives people with T-coil equipped hearing aids the ability to make and receive calls without noise interference.

Important: Refer to the booklet that comes with the LPS-3 for complete instructions and safety information.

1Plug the loopset jack into the bottom of your phone.

2Press Menu 4-5-3 (Settings > Accessory settings > Loopset).

3Scroll to Use loopset, then press Select.

4Scroll to Yes, then press Select.

	Note: The headset is the default accessory. If you follow steps 1
9	through - 4 above, you set the loopset as the default accessory
	recognized by your phone.

SET UP CAR PROFILE

If you are using your phone with a Nokia-approved car kit, you can set lights to On (lights stay on) or Automatic (after 15 seconds, lights turn off until the next key is pressed or the phone rings).

ADJUST VOLUME CONTROL

You set your volume by adjusting the earpiece volume buttons. See “Understand your phone” on page 11 for an illustration of volume control keys located on the left side of the Nokia 6590 phone.

• CHOOSE THE DISPLAY LANGUAGE

You can choose your phone’s display language.

1Press Menu 4-3-1 (Settings > Phone settings > Language).

2Scroll to the language you want, then press Select.

[ 98 ]