Diverse 5100 Handset & Charger ~ 4th Edition ~ 20th May ’03 ~ 5352
SETTING UP
Leave the handset for approx. 16 hours in the base station to charge the batteries, as they are not charged in the factory. The battery status icon flashes on the handset to indicate that the batteries are being charged.
To manually register a
BT Diverse 5100 handset to another base station
If you want to register your handset to another base station you will need to manually register it.
On the handset to be registered:
MENU Press the MENU options button.
Press the DOWN button until the display shows REGISTER HS.
OK Press the OK button. Display show PIN.
Enter your
OK Press the OK button. Display flashes REGISTER HS.
Following the user guide for the base station you are registering to place the base into registration mode.
To de-register a handset
INT Press the INT options button.
Press the UP or DOWN button to select the handset to be
MENU Press the MENU options button.
Press the DOWN button until the display shows
OK Press the OK button. Display will show PIN ****.
Enter your
OK Press the OK button. Display shows
OK Press the OK button to confirm. SAVED is displayed.
Press the RED PHONE button until you reach the idle screen.
Battery level icons
When the batteries are almost flat a beep sounds and the display shows the empty battery icon. You will need to recharge your handset before you can use it. The various states of charge are shown below:
Batteries fully charged
Batteries at 66%
Batteries at 33%
Batteries empty
BT Diverse Helpline – 08457 908 070
12
