Nokia E61 manual Connect to the net call service, Connect using a shortcut

3. Select Back until you return to the main menu. Tip: You can also use manual login to the net call service. Use the same settings instructions as with automatic login, but ensure that Registration is set to When needed and Transport type is set to UDP or TCP. With manual login, you need to manually select the network used in the net call service.

Connect to the net call service

To make or receive a net call, your device must be connected to a net call service. Select Menu > Connect. > Internet tel..

If you have selected automatic login, your device connects to the net call service automatically. If you have selected to login to the service manually, choose an available connection network from the list and press Select to connect to the net call service. The saved networks, which are marked with a star icon, are shown first on the list. If you want to stop the connection from establishing, select Cancel.

Select Options and from the following:

•Connect to service — to establish a connection to a service, when there is a net call service and suitable connection network available.

•Disconnect from serv. — to end the connection to the net call service.

•Change service — to choose the net call service for outgoing calls, if the device is connected to more than one service. This option is shown only if there is more than one configured service available.

•Configure service — to configure new services. This option is shown only if there are services that have not been configured.

•Save network — to save the network you are currently connected to. The previously saved networks are marked with a star icon on the list of connection networks. This option is shown only if you are connected to an unsaved wireless LAN network.

•Use hidden network — to connect to a net call service using a hidden wireless LAN network.

•Refresh — to manually refresh the list of connection networks. Use this option, if your wireless LAN network is not shown on the list. The list is also refreshed automatically every 15 seconds.

The available options may vary.

Your device can be connected only to one wireless LAN access point at a time. If you use two or more net call services, which use the same access point, your device may be connected to multiple services at the same time. The service used for outgoing net calls is shown in the view, where the connection networks are listed, and can be changed by selecting Change service.

After you have successfully connected to a service, you can save the used wireless LAN network as a known access point.

Connect using a shortcut

You may have a shortcut for Internet tel. in the active standby or you can add a shortcut if it is not available. See "Standby mode settings," p. 95. By using the shortcut, you can register manually, if a net call service

Make calls

51