Nokia N85 manual 159, Press , and select Tools Settings Phone Call forwarding

●Send my internet call ID — You can set your internet caller ID to be displayed to or hidden from the person to whom you are calling.

●Call waiting — To be alerted for incoming calls (network service) while you are in a call, select Activate. To check whether the function is activated, select Check status.

●Internet call waiting — To be notified of a new incoming internet call while you have a call in progress, select Activated.

●Internet call alert — To be alerted for incoming internet calls, select On. If you select Off, you are not alerted, but you receive a notification if you missed a call.

●Decline call with msg. — To send a text message to a caller informing why you could not answer the call, select Yes.

●Message text — Write a text to be sent in a text message when you reject a call.

●Image in video call — If video is not sent during a video call, you can select a still image to be displayed instead.

●Automatic redial — Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press the end key.

●Show call duration — Activate this setting if you want the length of a call to be displayed during the call.

●Summary after call — Activate this setting if you want the length of a call to be displayed after the call.

●1-touch— Select On, and the numbers assigned to the number keys (2 to 9) can be dialed by pressing and holding the key. See " 1-touch dial a phone number ," p. 125.

●Anykey answer — Select On, and you can answer an incoming call by briefly pressing any keypad key, except the power key.

●Line in use — This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this

network service, you are not able to make calls.
When line 2 is selected,	is shown in the standby

mode.

● Line change — To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.

Call forward

Press , and select Tools > Settings > Phone > Call forwarding.

Settings

159