Nokia N85 manual Tones, Modify the standby mode

If you want the caller’s name to be spoken when your device rings, select Options > Customize > Say caller's name > On. The caller’s name must be found in Contacts.

To create a new profile, select Options > Create new.

3-D tones

Press , select Tools > Utilities > 3-D tones. With 3-D tones, you can enable three-dimensional sound effects for ringing tones. Not all ringing tones support 3-D effects.

To enable the 3-D effects, select 3-D ringing tone effects > On. To change the ringing tone, select Ringing tone and the desired ringing tone.

To change the 3-D effect that is applied to the ringing tone, select Sound trajectory and the desired effect. To modify the effect, select from the following settings:

●Trajectory speed — Scroll left or right to adjust the speed at which sound moves from one direction to another. This setting is not available for all ringing tones.

●Reverberation — Select the type of echo.

●Doppler effect — Select On to have the ringing tone sound higher when you are closer to your device, and lower when you are farther away. When you get closer to the device, the ringing tone seems

to become higher, and lower when you move away from it. This setting is not available for all ringing tones.

To listen to the ringing tone with the 3-D effect, select Options > Play tone. If you enable the 3-D tones but do not select any 3-D effect, stereo widening is applied to the ringing tone.

To adjust the ringing tone volume, select Tools > Profiles > Options > Customize > Ringing volume.

Modify the standby mode

To change the look of the standby mode, press , and select Tools > Settings > General > Personalization > Standby mode > Standby

Personalize your device

49