Nokia N85 manual Packet data settings, Wireless LAN settings, SIP settings, Configurations

Packet data settings

Press , and select Tools > Settings >

Connection > Packet data.

The packet data settings affect all access points using a packet data connection.

●Packet data connection — If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it.

●Access point — The access point name is needed to use your device as a packet data modem to a compatible computer.

●High speed packet access — Enable or disable the use of HSDPA (network service) in UMTS networks.

Wireless LAN settings

Press , and select Tools > Settings > Connection > Wireless LAN.

● Show WLAN availability — Select whether is displayed in the standby mode when a wireless LAN is available.

●Scan for networks — If you set Show WLAN availability to Yes, select how often the device searches for available wireless LANs and updates the indicator.

To view advanced settings, select Options > Advanced settings. Changing wireless LAN advanced settings is not recommended.

SIP settings

Press , and select Tools > Settings >

Connection > SIP settings.

Session Initiation Protocol (SIP) settings are needed for certain network services using SIP. You may receive the settings in a special text message from your service provider. You can view, delete, or create these setting profiles in SIP settings.

Configurations

Press , and select Tools > Settings >

Connection > Configurations.

You may receive trusted server settings from your service provider in a configuration message. You can save view or delete these settings in configurations.

Access point name control

Press , and select Tools > Settings > Connection > APN control.

Settings

165