Nokia N85 manual GPS data, Route guidance

(GPS)	position information manually, select Enter
	manually.
Positioning	To edit or add information to a saved landmark (for
	example, a street address), scroll to a landmark, and
	select Options > Edit. Scroll to the desired field, and
	enter the information.
	You can sort your landmarks into preset categories,
	and create new categories. To edit and create new
	landmark categories, scroll right in Landmarks, and
	select Options > Edit categories.
	To add a landmark to a category, scroll to the landmark
	in Landmarks, and select Options > Add to
	category. Scroll to each category to which you want to
	add the landmark, and select it.
	To send one or several landmarks to a compatible
	device, select Options > Send, and the method. Your
	received landmarks are placed in the Inbox folder in
	Messaging.

GPS data

GPS data is designed to provide route guidance information to a selected destination, position information about your current location, and traveling information, such as the approximate distance to the destination and approximate duration of travel.

54	Press	, and select Tools > Connectivity > GPS
	data.

The coordinates in the GPS are expressed in degrees and decimal degrees format using the international WGS-84 coordinate system.

To use GPS data, the GPS receiver of your device must initially receive position information from at least four satellites to calculate the coordinates of your location. When the initial calculation has been made, it may be possible to continue calculating the coordinates of your location with three satellites. However, the accuracy is generally better when more satellites are found.

Route guidance

Press	, and select Tools > Connectivity > GPS
data	> Navigation.

Start the route guidance outdoors. If started indoors, the GPS receiver may not receive the necessary information from the satellites.

Route guidance uses a rotating compass on the device display. A red ball shows the direction to the destination, and the approximate distance to it is shown inside the compass ring.

Route guidance is designed to show the straightest route and the shortest distance to the destination, measured in a straight line. Any obstacles on the route, such as buildings and natural obstacles, are ignored. Differences in altitude are not taken into account when