Show captured image — Select whether to view the captured image after it is taken or to continue image capturing immediately.

Default image name — Define the default name for the captured images.

Extended digital zoom — The setting is only available in the main camera.On (continuous) allows the zoom increments to be smooth and continuous between digital and extended digital zoom, On (paused) allows the zoom increments to pause at the digital and extended digital step point, and Off allows a limited amount of zoom while retaining the image resolution. Use the extended zoom only when getting closer to the subject is more important than the final image quality. The overall quality of a digitally zoomed image is always lower than that of an unzoomed image.

Capture tone — Set the tone that sounds when you capture an image.

Memory in use — Select where to store your images.

Rotate image — Select whether you want images that are captured when the device is held upright to be rotated when you open them in Gallery.

Restore camera settings — Restore the camera settings to default values.

Color and lighting settings

In the active toolbar, select from the following:

Flash mode (

) (image only) — Select the desired

flash mode.

) — Select a color effect.

Color tone (

Switch video light on or Switch video light off

Switch the video light on or off (video mode

only).

White balance ( ) — Select the current lighting

condition. This allows the camera to reproduce colors more accurately.

Exposure compensation ( ) (image only) — If you

are shooting a dark subject against a very light background, such as snow, adjust the exposure to +1 or +2 to compensate for the background

brightness. For light subjects against a dark

background, use -1 or -2.

Sharpness (

) (image only) — Adjust the

sharpness of the image.

Contrast (

) (image only) — Adjust the difference

between the lightest and darkest parts of the image.

Light sensitivity (

) (image only) — Increase the

light sensitivity in low light conditions to avoid too dark images.

The screen display changes to match the settings you make.

The available settings vary depending on the selected camera.

The setup settings are shooting-mode specific. Switching between the modes does not reset the defined settings.

Camera

85

Page 85
Image 85
Nokia N85 manual Color and lighting settings