The available settings depend on the type of enhancement. Select an enhancement and from the following:

●Default profile — Set the profile that you want activated each time you connect a certain compatible enhancement to your device.

●Automatic answer — Select whether you want the device to answer an incoming call automatically after 5 seconds. If the ringing type is set to Beep once or Silent, automatic answer is disabled.

●Lights — Set whether lights remain on or are switched off after the time-out. This setting is not available for all enhancements.

TV-out settings

To change the settings for a TV-out connection, select TV-Outand from the following:

●Default profile — Set the profile that you want activated each time you connect a Nokia Video Connectivity Cable to your device.

●TV screen size — Select the aspect ratio of the TV: Normal or Widescreen for widescreen TVs.

●TV system — Select the analogue video signal system that is compatible with your TV.

●Flicker filter — To improve image quality on the screen of your TV, select On. The flicker filter may not diminish image flicker on all TV screens.

Security settings

Phone and SIM

Press , and select Tools > Settings > General > Security > Phone and SIM card.

●PIN code request — When active, the code is requested each time the device is switched on. Deactivating the PIN code request may not be allowed by some SIM cards.

●PIN code, PIN2 code, and Lock code — You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9.

If you forget the PIN or the PIN2 code, contact your service provider. If you forget the lock code, contact a Nokia Care point or your service provider.See "Access codes", p. 15.

Avoid using access codes similar to the emergency numbers to prevent accidental dialling of the emergency number.

Settings

149

© 2008 Nokia. All rights reserved.

Page 149
Image 149
Nokia RM-320 manual Security settings, TV-out settings, 149