Nokia RM-320 manual 156, Edit, Connection Access points Options Or New access point

Settings

156

Access points

Create a new access point

Press , and select Tools > Settings > Connection > Access points.

You may receive access point settings in a message from a service provider. Some or all access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them.

indicates a protected access point.

indicates a packet data access point.

indicates a WLAN access point.

Tip: You can create internet access points in a wireless LAN with the WLAN wizard.

To create a new access point, select Options > New access point.

To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider.

●Connection name — Enter a descriptive name for the connection.

●Data bearer — Select the data connection type.

Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.

To be able to use a data connection, your service provider must support this feature, and if necessary, activate it for your SIM card.

Packet data access points

Press	, and select Tools > Settings >		Edit
Connection > Access points		> Options >
or New access point.

Follow the instructions from your service provider.

●Access point name — You obtain the access point name from your service provider.

●User name — The user name may be needed to make a data connection, and is usually provided by the service provider.

●Prompt password — If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.

© 2008 Nokia. All rights reserved.