Nokia RM-320 manual 157

● Password — A password may be needed to	WLAN internet access points
make a data connection and is usually provided	Press , and select Tools > Settings >
by the service provider.	Connection > Access points > Options > Edit
● Authentication — Select Secure to always send	or New access point.
your password encrypted or Normal to send	Follow the instructions from the WLAN service
your password encrypted when possible.
	provider.
● Homepage — Depending on the access point
you are setting up, enter the web address or the	● WLAN network name — Select Enter
address of the multimedia messaging centre.	manually or Search for networks. If you select
Select Options > Advanced settings to change	an existing network, WLAN network mode and
	WLAN security mode are determined by the
the following settings:
● Network type — Select the internet protocol	settings of its access point device.
	● Network status — Define whether the network
type to transfer data to and from your device. The	name is displayed.
other settings depend on the selected network
	● WLAN network mode — Select Ad-hoc to
type.
	create an ad hoc network and to allow devices to
● Phone IP address (for IPV4 only) — Enter the IP
	send and receive data directly; a WLAN access
address of your device.	point device is not needed. In an ad hoc network,
● DNS address — Enter the IP addresses of the
	all devices must use the same WLAN network
primary and secondary DNS servers, if required	name.
by your service provider. Contact your internet
	● WLAN security mode — Select the encryption
service provider to obtain these addresses.
	used: WEP, 802.1x (not for ad hoc networks), or
● Proxy server address — Enter the address of
	WPA/WPA2. If you select Open network, no
the proxy server.
	encryption is used. The WEP, 802.1x, and WPA
● Proxy port number — Enter the port number
	functions can be used only if the network
of the proxy server.
	supports them.

Settings

157

© 2008 Nokia. All rights reserved.