Nokia RM-320 manual Tones, Personalise your device

To change the profile, select a profile, and Options > Activate. To also change the profile, press the power key in the standby mode. Scroll to the profile you want to activate, and select OK.

Tip: To switch between the general and silent profiles in the standby mode, press and hold

#.

To modify a profile, scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press the scroll key to open the choices. Tones stored in the mass memory of your device are indicated with .

In the tones list, select Download sounds (network service) to open a list of bookmarks. You can select a bookmark and start connection to a web page to download more tones.

If you want the caller’s name to be spoken when your device rings, select Options > Personalise, and set Say caller's name to On. The caller’s name must be saved in Contacts.

To create a new profile, select Options > Create new.

3-D tones

Press , select Tools > Utilities > 3-D tones. With 3-D tones, you can enable three-dimensional sound effects for ringing tones. Not all ringing tones support 3-D effects.

To enable the 3-D effects, select 3-D ringing tone effects > On. To change the ringing tone, select Ringing tone and the desired ringing tone.

To change the 3-D effect that is applied to the ringing tone, select Sound trajectory and the desired effect.

To modify the effect, select from the following settings:

●Trajectory speed — Scroll left or right to adjust the speed at which sound moves from one direction to another. This setting is not available for all ringing tones.

●Reverberation — Select the type of echo.

●Doppler effect — Select On to have the ringing tone sound louder when you are closer to your device, and softer when you are farther away.

When you get closer to the device, the ringing tone appears to become louder, and softer when

Personalise your device

99

© 2008 Nokia. All rights reserved.