Arm Assembly

9

33

 

 

9.

Open the parts bags labeled “ARM ASSEM-

 

 

 

BLY.”

97

 

 

Attach the Rear and Forward Leg Press Uprights

 

98

 

(97, 98) to the Leg Press Base (84) with two 3/8”

 

 

 

 

 

x 3 1/4” Bolts (87) and two 3/8” Nylon Locknuts

 

50

 

(50). Note: The Rear Leg Press Upright (97)

 

 

 

 

 

has an extra hole in it.

 

 

 

Press two 2” Square Inner Caps (33) into the

84

 

 

Rear and Forward Leg Press Uprights (97, 98).

 

 

 

 

87

 

10.

Attach the two Leg Press Attachments (100) to

10

 

 

the Rear and Forward Leg Press Uprights (97,

 

 

 

 

 

98) with two 3/8” x 3 1/4” Bolts (87) and two 3/8”

 

87

 

Nylon Jamnuts (63).

97

 

 

 

 

100

100

 

 

 

98

 

 

63

 

11.

Attach the Leg Press Plate (85) to the Leg Press

11

 

 

Attachments (100) with two 3/8” x 3 1/4” Bolts

 

 

100

 

 

(87), eight 3/8” Washers (55), and two 3/8” Nylon

 

 

 

 

 

Jamnuts (63).

85

 

 

 

 

 

Note: All eight of the 3/8” Washers (55) must

 

87

 

 

 

 

be between the Leg Press Attachments (100)

 

 

 

and the welded tube on the Leg Press Plate

 

87

 

(85).

55

55

 

 

55

 

 

 

63

 

12.

Attach a Handle (95) to the Sliding Seat Frame

12

 

 

(74) with two 1/4” x 1 1/2” Bolts (101) and two 1/4”

 

 

 

 

 

Nylon Locknuts (25).

74

 

 

 

 

 

Attach the other Handle (95) in the same manner.

 

 

 

 

 

95

 

 

101

 

 

 

25

 

 

 

95

 

 

 

9

 

Page 9
Image 9
NordicTrack 831.159770 user manual Arm Assembly, Open the parts bags labeled ARM Assem, Bly, Has an extra hole in it