NordicTrack 831.23765.1 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included hex keys and your own Phillips screwdriver, adjustable

wrench , and rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the hardware kit, check to see if it has been preassembled.

Wave Washer	Large Wave	M8 Split	M10 Split	M8 x 23mm
(80)–2	Washer (89)–2	Washer (97)–10	Washer (99)–4	Washer (31)–12
M8 Nylon	M10 Nylon	#8 x 1/2"	#8 x 1/2" Blunt	#8 x 3/4"
Locknut (94)–2	Locknut (82)–2	Screw (81)–2	Screw (92)–9	Screw (78)–14
M8 x 16mm Patch	M8 x 20mm Button	M8 x 20mm Patch	M8 x 58mm Button
Screw (84)–6	Screw (85)–4	Screw (86)–4	Bolt (104)–2
M8 x 40mm Button		M10 x 80mm Button Screw (93)–4
Screw (90)–6

5