13-MAINTENANCE AND REPAIRS (continued)

13.11.2 Special Set-Up Procedure (continued)

WARNING

To reduce the risk associated with muscle strain:

Use proper body mechanics when removing or installing taping heads that are moderately heavy or may be considered awkward to lift

2.Slide the head forward and lift straight up to remove it from the case sealer.

3.Lift the lower taping head, shown in

Figure 13-8C,straight up to remove it from the case sealer bed.

4.Refer to Manual 2 (Taping Head), See "Adjustments – Changing Tape Leg Length" for taping head set-up.

13.13.3 Drive Belt Assembly Height

The drive belt assemblies can be raised 48mm

[2 inches] to provide better conveying of tall boxes. This change increases the minimum box height that can be taped to 190mm [7-1/4 inches].

Disassemble – Figure 13-9

1.It is first necessary to raise the top taping head. Utilize the height adjustment crank and move the upper taping head to the fully raised position.

2.Remove and retain the screw (A), cap washer

(B) and spacer (C) from the front and rear arm assembly pivots.

3.Lift belt drive assembly (D) up off the arm assembly pivots.

Reassemble – Figure 13-10

4.Reassemble the spacer (C) onto the front and rear arm assembly pivots.

5.Install the belt drive assembly (D) onto the pivots and secure with the cap washers (B) and screws

(A).

Note – Both drive belt assemblies must be installed at the same operating height.

A

B

C

D

Figure 13-9 – Drive Belt Assembly, Disassembly

A

B

D

C

Figure 13-10 – Drive Belt Assembly, Reassembly

800a3-NA

31

2011 September

Page 43
Image 43
3M 800a3 manual Drive Belt Assembly Height, Disassemble Figure, Reassemble Figure

800a3 specifications

The 3M 800A3 is an advanced respiratory protective device designed to provide high-performance filtration and comfort for users in various environments. It is particularly beneficial for those working in industries such as construction, manufacturing, and healthcare, where exposure to airborne contaminants is a significant concern. The design and technology behind the 3M 800A3 reflect the company's commitment to innovation and safety.

One of the main features of the 3M 800A3 is its high-efficiency particulate air (HEPA) filtration system. This system is engineered to capture at least 99.97% of airborne particles, including dust, pollen, smoke, and other harmful substances. This level of efficiency ensures that users can work confidently, knowing they are protected against fine particulate matter that could pose health risks.

The 3M 800A3 also incorporates a unique ergonomic design that enhances comfort and wearability. The soft, adjustable straps allow for a customizable fit, which is essential for prolonged use. Additionally, the device features a lightweight construction that reduces fatigue, enabling users to maintain focus and productivity throughout their workday.

Another notable characteristic is its compatibility with various 3M filters and cartridges. This flexibility allows users to tailor their respiratory protection based on the specific hazards they may encounter. Whether dealing with chemical vapors, fumes, or particulates, the 3M 800A3 can be equipped with the appropriate combination of filters to ensure optimal safety.

Moreover, the 3M 800A3 is equipped with a low-profile design, which minimizes interference with other personal protective equipment, such as safety glasses or face shields. The thoughtful engineering behind this product takes into account the practical challenges faced by users in their work environments.

To further enhance user experience, the 3M 800A3 includes features such as an exhalation valve that allows for easier breathing and reduced heat buildup within the mask. This is particularly advantageous in high-temperature settings or while performing strenuous tasks.

In summary, the 3M 800A3 respirator is a state-of-the-art protective device that combines advanced filtration technology, ergonomic design, and compatibility with various filters. Its focus on comfort and efficiency makes it a valuable tool for professionals needing reliable respiratory protection in challenging conditions.