Maintenance (continued)

WARNING

To reduce the risk associated with shear, pinch, and entanglement hazards:

Turn air and electrical supplies off on associated equipment before performing any adjustments, maintenance, or servicing the taping heads

Never attempt to work on the taping head or load tape while the box drive system is running

To reduce the risk associated with sharp blade hazards:

Keep hands and fingers away from tape cutoff blades under orange blade guards. The blades are extremely sharp

Cleaning

Regular slotted containers produce a great deal of dust and paper chips when conveyed through taping heads. If this dust is allowed to build-up on the heads, it can cause wear on the moving parts. Excessive dirt build-up should be wiped off with a damp cloth. Cleaning should be done once per month, depending on the number and type of boxes used. If the boxes used are dirty, or if the environment in which the heads operate is dusty, cleaning on a more frequent basis may be necessary.

Note – Never attempt to remove dirt from taping heads by blowing it out with compressed air. This can cause the dirt to be blown inside the components onto sliding surfaces. Dirt in these areas can cause serious equipment damage. Never wash down or subject taping heads to conditions causing moisture condensation on components. Serious equipment damage could result.

Applying/Buffing Roller Replacement

Replacing roller requires removal of shaft and mounting screws. With no area on the shaft to grip, the shaft often turns when attempting to remove the second screw.

To ease removal of second screw, a 5mm hex socket has been provided at the bottom of the threads in both ends of the shaft. Insert a 5mm hex key wrench into this socket after removing one screw to hold the shaft for removal of the second screw. See Figure 4-2.

Hex Socket

Section View of

5mm HexRoller/Shaft Key Wrench

Figure 4-2 – Roller Shaft Section View

AccuGlide 3 - 3" - NA

13

2012 January

 

Page 103
Image 103
3M 800a3 manual Applying/Buffing Roller Replacement, Hex Socket Section View 5mm HexRoller/Shaft Key Wrench

800a3 specifications

The 3M 800A3 is an advanced respiratory protective device designed to provide high-performance filtration and comfort for users in various environments. It is particularly beneficial for those working in industries such as construction, manufacturing, and healthcare, where exposure to airborne contaminants is a significant concern. The design and technology behind the 3M 800A3 reflect the company's commitment to innovation and safety.

One of the main features of the 3M 800A3 is its high-efficiency particulate air (HEPA) filtration system. This system is engineered to capture at least 99.97% of airborne particles, including dust, pollen, smoke, and other harmful substances. This level of efficiency ensures that users can work confidently, knowing they are protected against fine particulate matter that could pose health risks.

The 3M 800A3 also incorporates a unique ergonomic design that enhances comfort and wearability. The soft, adjustable straps allow for a customizable fit, which is essential for prolonged use. Additionally, the device features a lightweight construction that reduces fatigue, enabling users to maintain focus and productivity throughout their workday.

Another notable characteristic is its compatibility with various 3M filters and cartridges. This flexibility allows users to tailor their respiratory protection based on the specific hazards they may encounter. Whether dealing with chemical vapors, fumes, or particulates, the 3M 800A3 can be equipped with the appropriate combination of filters to ensure optimal safety.

Moreover, the 3M 800A3 is equipped with a low-profile design, which minimizes interference with other personal protective equipment, such as safety glasses or face shields. The thoughtful engineering behind this product takes into account the practical challenges faced by users in their work environments.

To further enhance user experience, the 3M 800A3 includes features such as an exhalation valve that allows for easier breathing and reduced heat buildup within the mask. This is particularly advantageous in high-temperature settings or while performing strenuous tasks.

In summary, the 3M 800A3 respirator is a state-of-the-art protective device that combines advanced filtration technology, ergonomic design, and compatibility with various filters. Its focus on comfort and efficiency makes it a valuable tool for professionals needing reliable respiratory protection in challenging conditions.