Adjustments (continued)

WARNING

•To reduce the risk associated with shear, pinch, and entanglement hazards:

−Turn air and electrical supplies off on associated equipment before performing any adjustments, maintenance, or servicing the machine or taping heads

−Never attempt to work on the taping head or load tape while the box drive system is running

Tape Leg Length

WARNING

•To reduce the risk associated with sharp blade hazards:

−Keep hands and fingers away from tape cutoff knives under orange blade guards. The blades are extremely sharp

Leading Tape Leg Length Adjustment – Figure 5-6

The one-way tension roller position is adjustable to control the leading tape leg length.

Moving this roller farther away from the box top or bottom surface will decrease the leading leg length. Moving it closer to the box top or bottom surface will increase the leading leg length.

Changing Tape leg Length from 70 to 50mm [2-3/4 to 2 inches] – Figure 5-7

Note – When changing tape leg length, both upper and lower heads must be adjusted to apply the same leg lengths.

1.Remove and retain two hex head screws and remove the brush from normal position “A” on side frame.

2.Remount and secure brush in position “A-A” on side frame forward of normal location using original fasteners.

3.Remove cut-off bracket extensions from position "B".

4.Remount cut-off bracket extensions in forward position “B-B”.

5.Remove and retain the one-way tension roller assembly from slot “C” in frame.

6.Remount tension roller assembly near top of slot “C-C” in frame using original fasteners.

7.Adjust tension roller according to "Leading Tape Leg Length Adjustment" above.

16

AccuGlide 3 - 3" - NA

One-Way

Tension

Roller

Tape Leg

50 or 70mm ± 6mm [2 or 2-3/4in. ± 1/4in.

Figure 5-6 – Leading Tape Leg Length

 

One-Way

Position A

Tension Roller

Assembly

 

Position A-A

Slot C-C

 

Slot C

Brush Position B

Cut-Off

Bracket

Position B-B

Extension

Figure 5-7 – Changing Tape Leg Length

2012 January

Page 105 Page 107
Page 106
Image 106
3M 800a3 manual Leading Tape Leg Length Adjustment Figure, Changing Tape Leg Length
Page 105 Page 107

800a3 specifications

The 3M 800A3 is an advanced respiratory protective device designed to provide high-performance filtration and comfort for users in various environments. It is particularly beneficial for those working in industries such as construction, manufacturing, and healthcare, where exposure to airborne contaminants is a significant concern. The design and technology behind the 3M 800A3 reflect the company's commitment to innovation and safety.

One of the main features of the 3M 800A3 is its high-efficiency particulate air (HEPA) filtration system. This system is engineered to capture at least 99.97% of airborne particles, including dust, pollen, smoke, and other harmful substances. This level of efficiency ensures that users can work confidently, knowing they are protected against fine particulate matter that could pose health risks.

The 3M 800A3 also incorporates a unique ergonomic design that enhances comfort and wearability. The soft, adjustable straps allow for a customizable fit, which is essential for prolonged use. Additionally, the device features a lightweight construction that reduces fatigue, enabling users to maintain focus and productivity throughout their workday.

Another notable characteristic is its compatibility with various 3M filters and cartridges. This flexibility allows users to tailor their respiratory protection based on the specific hazards they may encounter. Whether dealing with chemical vapors, fumes, or particulates, the 3M 800A3 can be equipped with the appropriate combination of filters to ensure optimal safety.

Moreover, the 3M 800A3 is equipped with a low-profile design, which minimizes interference with other personal protective equipment, such as safety glasses or face shields. The thoughtful engineering behind this product takes into account the practical challenges faced by users in their work environments.

To further enhance user experience, the 3M 800A3 includes features such as an exhalation valve that allows for easier breathing and reduced heat buildup within the mask. This is particularly advantageous in high-temperature settings or while performing strenuous tasks.

In summary, the 3M 800A3 respirator is a state-of-the-art protective device that combines advanced filtration technology, ergonomic design, and compatibility with various filters. Its focus on comfort and efficiency makes it a valuable tool for professionals needing reliable respiratory protection in challenging conditions.
Top Page Image Contents