3M 800a3 manual Skill 1: Machine Operator

3-SAFETY(continued)

3.11Operator's Skill Levels Required to Perform the Main Operations on the Machine

The Table shows the minimum operator's skill for each machine operation.

Important: The factory manager must ensure that the operator has been properly trained on all the machine functions before starting work.

Skill 1: Machine Operator

This operator is trained to use the machine with the machine controls, to feed cases into the machine, make adjustments for different case sizes, to change the tape and to start, stop and restart production.

Skill 2a: Electrical Maintenance Technician

This operator is trained to use the machine as the MACHINE OPERATOR and in addition is able to:

•Work with the safety protection disconnected

•Check and adjust mechanical parts

•Carry out machine maintenance operations / re- pairs / adjustments / repair electrical components

He is allowed to work on live electrical panels, connector blocks, control equipment, etc.

Skill 3: Specialist from the Manufacturer Skilled operator sent by the manufacturer or its agent to perform complex repairs or modifications (on agreement with the customer).

Skill 2: Mechanical Maintenance Technician This operator is trained to use the machine as the MACHINE OPERATOR and in addition is able to:

•Work with the safety protection disconnected

•Check and adjust mechanical parts

•Carry out machine maintenance operations/repairs He is not allowed to work on live electrical components

WARNING

•To reduce the risk associated with mechanical and electrical hazards:

−Allow only properly trained and qualified personnel to operate and service this machine

Operator's Skill Levels Required to Perform the Main Operations on Machine

		Required	Number of
Operation	Machine Status	Operator
			Operators
		Skill
Machine installation and setup	Running with safety	2 and 2a	2
	protections disabled
Adjusting box size	Stopped by pressing the	1	1
	EMERGENCY STOP
	button
Tape replacement	Stopped by pressing the	1	1
	EMERGENCY STOP
	button
Blade replacement	Electric power	2	1
	disconnected
Drive belt replacement	Electric power	2	1
	disconnected
Ordinary maintenance	Electric power	2	1
	disconnected
Extraordinary mechanical	Running with safety	3	1
maintenance	protections disabled
Extraordinary electrical	Running with safety	2a	1
maintenance	protections disabled

800a3-NA	2011 September
	9