3M 800a3 INTRODUCTION continued, Manual Maintenance, How to Read and Use the Instruction Manual

1-INTRODUCTION (continued)

1.1Manufacturing Specifications / Description / Intended Use (continued)

The 3M-MaticTMcase sealing machines have been designed and manufactured in compliance with the legal requirements at the date of inception.

1.2.2 Manual Maintenance

Keep the manual in a clean and dry place near the machine. Do not remove, tear, or rewrite parts of the manual for any reason. Use the manual without damaging it. In case the manual has been lost or damaged, ask your after sale service for a new copy.

1.2 How to Read and Use the Instruction Manual

This instruction manual covers safety aspects, handling and transport, storage, unpacking, prepara- tion, installation, operation, set-up and adjustments, technical and manufacturing specifications, mainte- nance, troubleshooting, repair work and servicing, electric diagrams, warranty information, disposal (ELV), a definition of symbols, plus a parts list of the 3M-MaticTM800a3 Adjustable case sealer

3M Industrial Adhesives and Tapes Division 3M Cen- ter, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition September 2011 Copyright 3M 2011 All rights reserved. The manufacturer reserves the right to change the product at any time without notice Publi- cation © 3M 2011 44-0009-2081-7.

1.2.1 Importance of the Manual

The manual is an important part of the machine; all information contained herein is intended to enable the equipment to be maintained in perfect condition and operated safely. Ensure that the manual is avail- able to all operators of this equipment and is kept up to date with all subsequent amendments. Should the equipment be sold or disposed of, please ensure that the manual is passed on. Electrical and pneu- matic diagrams are included in the manual. Equip- ment using PLC controls and/or electronic compo- nents will include relevant schematics or programs in the enclosure and in addition, the relevant documen- tation will be delivered separately.

1.2.3 Consulting the Manual

The manual is composed of:

-Pages which identify the document and the machine

-Index of the subjects

-Instructions and notes on the machine

-Enclosures, drawings and diagrams

-Spare parts (last section)

All pages and diagrams are numbered. The spare parts lists are identified by the figure identification number. All the notes on safety measures or possible dangers are identified by the symbol:

1.2.4How to Update the Manual in Case of Modifications to the Machine

Modifications to the machine are subject to manu- facturer’s internal procedures. The user receives a complete and up-to-date copy of the manual to- gether with the machine. Afterwards the user may receive pages or parts of the manual which contain amendments or improvements made after its first publication. The user must use them to update this manual.

800a3-NA 2 2011 September