6. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
a. Remove the screws from the hood. Carefully remove the hood. |
|
| |
Locate the Reed Switch (74) and the Magnet (95) on the left side | 1/8” |
| |
of the Pulley (17). Turn the Pulley until the Magnet is aligned with | 17 | ||
the Reed Switch. Make sure that there is a 1/8”gap between | 90 | ||
the Magnet and the Reed Switch. If necessary, loosen the | 74 | 95 | |
Screw (90) and move the Reed Switch slightly. Retighten the | |||
| |||
|
| ||
Screw. |
|
| |
utes to check for a correct speed reading. | Top |
| |
| View |
|
17
