NordicTrack A2750 PRO warranty Again. if YOU do not Connect the CON

9. With the help of a second person, hold the sides	9		Console
of the console assembly and place the console
assembly near the Right Upright (83) and the			Assembly
Left Upright (not shown). Do not lift the con-
sole assembly by the Right Handrail (79) or
the Left Handrail (not shown).
Connect the Upright Wire (85) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-		Console				79
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON		Wire			85
THE POWER. Remove the wire tie from the	Wire
Upright Wire.
		Tie				Console
						Wire
					83	85
10. Slide a Handrail Cover (77) onto the lower end	10			Console
of each Handrail (78, 79).
Set the console assembly on the Left and Right				Assembly
Uprights (82, 83). At the same time, insert the
lower end of the Handrails (78, 79) over the
brackets on the Uprights. Be careful not to								4
pinch any wires. Insert the excess wire into the
Right Upright.
Start four 5/16" x 3/4" Patch Bolts (5) with four
5/16" Star Washers (9) into the Uprights (82,	4				5	5
83). Then, start two 5/16" x 1 1/2" Patch Bolts				9			9
(4) into the Uprights. Do not tighten the Patch					79	77
Bolts yet.				77
						Bracket
			83	Bracket				78
						82
	11