2.While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (16) to the Frame with four M8 x 50mm Button Screws (52) and four M8 Split Washers (55).
3. Turn the Adjustment Knob (7) into the Frame (1).
4.While another person holds the Upright (2) near the Frame (1), connect the Upper Wire Harness (42) to the Lower Wire Harness (43). Next, carefully pull the Upper Wire Harness up through the Upright while inserting the Upright into the Frame. Attach the Upright with an M10 x 63mm Bolt Set (62). Be careful to avoid pinch- ing the Wire Harnesses (42, 43).
Attach the Water Bottle Holder (74) to the Upright (2) with two M4 x 22mm Screws (60).
5.The Console (4) requires four “D” batteries (not includ- ed); alkaline batteries are recommended. Remove the battery cover from the bottom of the Console. Next, insert four batteries into the battery compartment; make sure that the batteries are oriented as shown by the diagram inside the battery compartment. Reattach the battery cover.
2 |
|
| |
| 1 |
| |
| 16 |
| |
| 55 | 55 | |
| 52 | 52 | |
|
| ||
3 |
|
| |
| 7 |
| |
| 1 |
| |
4 |
|
| |
| 2 | 74 | |
|
| ||
|
| Make sure | |
|
| the Wire | |
42 |
| Harnesses | |
62 | do not get | ||
| |||
| pinched and | ||
43 | 60 | ||
62 | 1 | damaged | |
| during this | ||
|
| step. | |
5 |
|
| |
|
| 4 | |
|
| Batteries | |
| Battery |
| |
| Cover |
|
5
