![](/images/new-backgrounds/1222299/2222997x1.webp)
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench and Phillips screw-
driver .
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on page 21. The second number is the quantity needed for assembly. Note: Some small parts may have been
M6 Nylon | M6 Washer | M8 Split | M4 x 16mm | M4 x 22mm |
Round Head | ||||
Locknut | Washer | Screw | Screw | |
M6 x 16mm Button | M6 x 36mm Button | M8 x 16mm Button | M8 x 19mm Button | |
Screw | Bolt | Screw | Screw | |
| M8 x 50mm Button | M10 x 36mm Button |
| |
| Screw |
| Screw |
|
| M10 x 63mm Bolt Set |
|
1.Attach the Left Front Stabilizer (15) to the left side of the Frame (1) with three M8 x 16mm Button Screws (54) and three M8 Split Washers (55).
Attach the Right Front Stabilizer (not shown) to the right side of the Frame (1) in the same way.
1 |
|
17 | 15 |
| 1 |
| 55 |
| 55 |
| 54 |
| 54 |
4