NordicTrack NTC4015.0 Pulse Wires 51, To avoid, Pinching, Be careful to, Avoid pinching

6.While another person holds the Console (4) near the Upright (2), connect the Upper Wire Harness (42) to the wire harness on the Console, and connect the Pulse Extension Wire (51) to the pulse wire on the Console. Insert the excess wiring into the Upright.

Attach the Console (4) to the Upright (2) with four M4 x 16mm Round Head Screws (80). Be careful to avoid pinching the wires and wire harnesses.

7.Hold the Right Handlebar (5) near the Upright (2), and connect the Pulse Extension Wire (51) to the Pulse Wire (75).

Attach the Right Handlebar (5) to the Upright (2) with two M6 x 36mm Button Bolts (76) and two M6 Nylon Locknuts (72). Be careful to avoid damaging the

Pulse Wires (51, 75).

Attach the Left Handlebar (3) to the Upright (2) in the same way.

8.Attach the Seat (9) to the Seat Bracket (11) with four M6 x 16mm Button Screws (81) and four M6 Washers (88). Do not tighten the Button Screws yet.

6
		4
		Be careful
	80	to avoid
		pinching
	42	the Wire
		Harnesses.
		51
80		2
7
		76
		5
3	51	75
	2	72
		Be careful to
		avoid pinching
		the Pulse
		Wires.
8
		9
		11
		88
	88	81
	81

6